Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

 

Downdraft Work Stations
 
MODEL DW CONVERTIBLE DOWNDRAFT
Versatility is offered with this uniquely engineered downdraft solution. The DW convertible can be used as a downdraft table or with the use of the manual external lever you instantly convert operation from normal downdraft mode to a powerful high-efficiency dust collector mode. Single or multiple rear inlets connect duct work to hoods, external supported source capture arms or directly to another machine to evacuate dust, fumes or smoke. The DW Convertible has work surface widths up to 52 inches without losing slot velocity. Side skirts increase the effectiveness of dust capture and minimize dust being thrown over the units sides.
View Specs View DW220 Specs
     
USA FLAG MODEL DW 230 INDUSTRIAL
Other models available provide a sit down solution to production volumes of dust. Some applications require the operator to do continuous deburring, grinding, sanding or other finishing procedures which require rigid dust collection parameters while maintaining a safe work environment . This downdraft table allows for leg under design and still maintains a low profile and small footprint. These workstations can be combined to form a series of tables for oversized work pieces. Increased work surface up to 52 inches in width makes this downdraft table the toughest on the market with the highest slot velocity and lowest power consumption available. A total workstation that increases production and protects the workers breathing zone
View Specs View DW 230 Specs
 
     
MODEL DW 530 DOWNDRAFT
The model DW 530 provides operator controlled air flow at the work piece where it is needed most. Today's high speed hand tools create high velocity chips and dust. To capture high velocity particulate into a downdraft bench collector, you need high velocity air flow. The model DW 530 delivers a massive 4200 CFM with work surface velocities exceeding 2400 FPM and powered with only a 5 horsepower motor. This bench offers 300 square feet of permanent, high efficiency fabric filters inside the bench to filter out dust. The cleaned air is re-circulated within the work environment, saving the cost of heated or conditioned air. Overall collection efficiency of the filters is 99.9% at 5 microns. Work surface is 60 inches by 45 inches and can be equipped with steel, aluminum or wood work grid.
View Specs View DW530 Specs
     
  MODEL DW 640 DOWNDRAFT
Providing a permanent filter with manual, semi-automatic or fully automatic filter cleaning capabilities is yet another feature of our downdraft benches. This model can double as two stations while maintaining high slot velocities. The work surface is a full 72 inches and can be increased to a 102 inches to satisfy large work pieces. The addition of skirts in a variety of patterns allows this station to accommodate several operators at once. Air, dust and fumes are drawn thru the grid and into the peripheral slots between the inner structure and outer skin. A 180 degree turn throws coarse dust directly into the dust pan in the bottom of the unit. The fine dust is collected on the outside surfaces of the permanent filters where it remains until the operator releases the dust into the dust pan by a manually operated foot pedal.
View Specs View DW 640 Specs
     
  DOWNDRAFT WORK CENTERS
Downdraft work centers that can accommodate up to 8 operators. Multiple tables can be grouped together for larger work surfaces and connected to a remote dust collector. Off- sets and set-backs are often used to accommodate work pieces larger than the table surface. A clean work area translates into a safe work environment throughout your plant. Our downdraft tables allow you to protect the infamous "breathing zone" of the operator, as well as preventing dust from migrating to product surfaces, shipping containers and other work areas.
View Specs View DW Industrial Series Specs
   
Credit Cards Accepted Environmental Clean Air Company
Improving Indoor Air Quality Since 1975

678-871-8700 or 866-366-2034


E-mail: Sales@environmentalcleanair.com
 
Home- Dust Collectors - Down Draft Tables - Industrial Vacuums - Mist Collectors - Welding Smoke - Air Cleaners
Business Profile - Contact Us